CellarPro 4200VSi Wine Cellar Cooling Unit #1512

• Cooling Capacity @ 13 C: 3788 BTUH
• Decibels (Low Fan Speed): 54
• Dedicated Circuit: 15 Amp
• Power: 220VAC/ 50Hz
• Refrigerant: R134A

CellarPro 4200VSi-220V / 50Hz Cooling Unit (P/N 1512). CellarPro engineered the 4200VSi 220V cooling unit to provide maximum cooling power and adjustable humidity control for cellars up to 42 cubic meters. Designed for internal installations that provide 187-254V power at 50Hz, 4200VSi 220V units are built with high-output Danfoss compressors and oversized coils for maximum performance in high-temperature environments up to 46C. These units also feature variable-speed fans with a low setting for super-quiet operation when conditions permit.

All air-cooled refrigeration equipment requires fresh air intake to dissipate the heat generated by the cooling unit. The fresh air intake CANNOT come from the wine cellar space - it must come from space outside the cellar.

♦ View more of our CellarPro Products

♦ Click to view more CellarPro Units

• This unit can be configured to operate in extreme temperature conditions (-29 to 46C). If the unit's location does not provide sufficient room for airflow, you may need to purchase a rear duct kit.
• Dual high-output centrifugal fans come with variable speed settings for your choice of maximum cooling power at the high fan speed, or super-quiet operation (53.7 decibels) at the low fan speed.
• Adjustable humidity control combines a high-output compressor with flexible fan cycles to maintain a recommended level of moisture inside your cellar.
• Extra-large coils generate maximum cooling power inside the cellar.
• Excess condensate is managed with a high-capacity stainless steel drain pan, welded 1.27 cm drain line and 200W electric heating element with "On/Off" Control.
• Commercial-grade Electrofin coating protects the evaporator coils from leaks and corrosion.
• Intuitive LED display panel mounted on the evaporator with digital programmable thermostat is simple and easy to use. Remote thermostat is available as an upgrade.
• Energy-saver mode, quick-chill mode, and auto-defrost cycle provide convenient solutions to common cellar needs.
• Temperature set point range is 8.3C to 16.7C when the cooling unit is properly sized.
• Unit operates with minimal vibrations and less noise than comparable units from competitors.
• Audible and visual alarms and maintenance-needed indicator protect the cooling unit and the wine cellar.
• Common dedicated 15-amp circuit is required to power the unit.
• With dual power sources and a 3-meter power cord, the unit can be plugged into a receptacle from either the front or the rear of the cooling unit, providing flexibility for most installations.
• Our easy-access disposable air filter protects the condenser coils and increases the expected useful life of the cooling unit.
• Adjustable mounting brackets, included as standard equipment, ensure easy installation.
• Removable steel case and refrigerant access valve provides access to the internal components for servicing and repair.
• CellarPro's 1-Year Standard Warranty, the most thorough in the industry, protects the unit against manufacturing defects.

• Model: 4200VSi
  
• Cellar Size(Nominal Cu Ft)*: 1000
• Compressor Size (HP): 2/5 Ton
• BTUH @ 55 F: 3788
• CFM (High Fan Speed): 319
• Decibels (Low Fan Speed): 54
• Installation Environment: Indoor
• Ambient Intake Range: -20** to 110F
• Power: 220V AC/ 50Hz
• Amps (Starting/Running): 14.8/ 6.3
• Dedicated Circuit: 15-Amp
• Refrigerant: R134a
• Drain Line: Included -1/2" ID
• Ducting - Cold Side: Yes - 8" Diam.
• Ducting - Hot Side: Yes - 8" Diam.

Dimensions

• Size (W x D x H -inches): 13.7 x 24.8 x 19.29
• Weight (lbs): 154

• CellarPro 4200VSi-220V units are self-enclosed, fully-charged units designed to be installed through-the-wall in 220V / 50Hz environments.
• 4200VSi-220V units also can be located remotely from the cellar with the addition of one of our front duct packages. Offered with or without insulated flex ducting, in a choice of configurations for low or high humidity conditions, our front duct packages allow these cooling units to be ducted up to 15 equivalent meters away from the cellar using 20-cm ducting.
• When calculating equivalent feet, each 90-degree turn counts for 2.4 meters.
• For remote or inaccessible installations, we offer a remote control display kit which is wired to the cooling unit and allows the digital display to be mounted inside or outside the cellar.
• 4200VSi-220V units require fresh air intake at the rear of the cooling unit. If sufficient space does not exist to provide sufficient airflow to the rear of the cooling unit, you may need our rear duct kit.
• 4200VS-220V cooling units can be installed completely inside the wine cellar when used with our rear duct kit, which allows you to duct the supply and return airflows from the rear of the cooling unit up to 30 equivalent meters (15 meters per duct).
• For installation in environments below 4.4C, 4200VSi-220V units require our Compressor Heater (P/N 1727) .
• For installation in environments below -6.7C down to -29C, we recommend our Fan-Cycling Switch (P/N 6972) combined with our compressor heater.
• The front of the cooling unit should never be exposed to temperatures below 0C.
• A CellarPro cooling unit must always be used in the upright position, and should never be operated on its side or upside down.

• Spec Sheet
• Owner's Manual
• Product Brochure
• Cut Sheet
• Cold Side Ducting - Cut Sheet
• Cold and Hot Side - As Ducted
• Installation Diagrams
• Warranty Overview

• CellarPro Cooling Systems VS Series