Free Shipping- Overview
- Features
- Tech Specs
- Applications
- Reviews
- Water Removal: 75.6 pints per day @ 80°F 60%
- Process Airflow: 100 cfm
- Weight: 139 lbs
The Bry-Air Min-Pac MP100 DESICCANT DEHUMIDIFIER is perfect for applications where an extremely low relative humidity must be maintained. It is can maintain levels below 45%.
The Bry-Air Min-Pac MP100 DESICCANT DEHUMIDIFIER is the smallest desiccant dehumidifier within the Bry-Air Mini-Pac series.
- See more Bry-Air Mini-Pac DESICCANT DEHUMIDIFIERS
- View all of our Desiccant Dehumidifiers
METHODS OF DEHUMIDIFICATION
Dehumidification is possible using two possible principles, Condensation with refrigeration style dehumidifiers and Adsorption with desiccant dehumidifiers.
Desiccant dehumidifiers perform exceptionally well when used in cooler climates, or when a low dew-point, deep drying or low humidity levels are required. Since desiccant dehumidifiers do not produce water, they will work effectively down to sub zero temperatures.
Their operation is simplistic yet extremely effective and reliable. Air (Process Air) is drawn into the dehumidifier, where is passes over a wheel impregnated with Silica Gel. As the air passes over this wheel, any moisture present in the air is absorbed into the Silica Gel wheel before leaving the dehumidifier as warm dry air.
The Silica Gel wheel is continually, slowly rotating, typically at three revolutions per hour. As the wheel rotates, a small portion passes through the regeneration segment. During this phase a second air stream (Regeneration Air) is heated to a high temperature before passing over the wheel. Any moisture present in the wheel is released into this air stream; this hot wet air is then exhausted outside the area being dried.
Key Design Features
With MiniPAC™ Dehumidifiers, you will get:
- A Compact dehumidification unit that fits easily into small places
- No replacement filters to inventory
- Half the energy consumption of over-cooling and reheat
- Low operating cost
- Quiet operation and the guaranteed performance of Bry-Air desiccant rotors
- Convert existing heating and cooling systems to maintain humidity control throughout the entire building (not just one room)
- Dehumidifier available in six models; 100, 175, 350, 600, 900 and 1200 CFM
- Optional pre and post cooling 24/7 tech support
Dehumidifier Feature Highlights
- High efficiency and reliability
- ETL listed
- A totally self-contained unit
- Insulated Process and Reactivation air flow sectors
- Rotor with stainless steel flange
Dehumidifier Controls and Safeties
- Differential air pressure switch for proving react air flow
- High temp safety thermostat
- Reactivation cool down
- Electrical interlock of fan motors, heaters and rotor drive
- Optional Humidistat for humidity control
Easy to Operate
-
Suitable for continuous operation
-
Auto / Manual selector switch
-
Power on, heater on, and fault status indication
-
Independent blower for each air stream
- Volume control dampers
Easy to install
-
Several mounting and installation options
- Small physical size Easy to maintain
-
Quick and easy to service
- Rotor is water washable
- Model No.: MP100
- Height: 15 5/16"
- Width: 26 5/8"
- Depth: 18 1/2"
- Weight: 100lbs
- Voltage: 208/240/1/60V
- Full Load KW:4.03
- Phase: 1
- Frequency: 60 Hz
- Process Airflow – Dry Air: 100 cfm
- Regen Airflow – Wet Air: 34 cfm
- Process Duct Size – Dry Air: 4"
- Regen Duct Size – Wet Air: 4"
- Typical Extraction @ 80°F / 60%: 75.6 ppd
- Min Operating Temperature: -4 °F (-20°C)
- Max Operating Temperature: 104 °F (40°C)
- Offices
- Shops
- Restaurants
- Warehouses
- Basements
- Factories
- De-Flooding
- Pharmaceutical
- Defense Industry
- Confectionary
- Laboratories
- Medical
- Food Industry
- Agriculture
- Cold Stores
- Hospitals
- Hotels
- Stadiums
- Ships
