- Overview
- Features
- Tech Spes
- PDF Downloads
- Reviews
- Model: A70
- Part Number: A70
- Water Removal: 70 Pints Per Day
- Voltage, Phase, Frequency: 120VAC, 1 Phase, 60 Hz
- Current draw: 5.4 Amps
- Weight: 56 lbs
Anden dehumidifiers are designed for maximum growth. This unit delivers industrial-strength dehumidification to micro grow operations, removing 70 pints of moisture per day. It can be programmed to circulate air within your cultivation space, carrying excess moisture away from your crop to prevent fungus, disease, and plant pests. Check below for the full list of industrial specs and grow-optimized features that will set your operation apart.
The Anden Model A70 Dehumidifier is designed to dehumidify the air coming into the unit by passing the incoming air over an evaporator coil to drop the air temperature below the dew point of the air. Moisture is removed from the air and drained out of the unit to a common floor or waste drain. The air is then reheated in the condenser coil and exits the unit.
Dehumidification occurs until the set point is reached, then shuts off until periodic sampling determines a need for operation.
The Anden Model A70 is the perfect solution for the precise management of humidity required in an indoor growing environment.
Click here to view more of Anden Dehumidifiers
The Anden Impact
Anden dehumidifiers put you in control of your growth environment. You get maximum moisture removal and VPD control, with on-board and remote monitoring capabilities to make it all intuitive. Simply put, these grow-optimized products are designed with your plants in mind.
Humidity And Growth
Humidity control is critical. As a cultivator, you know that. Each stage of growth requires an optimized environment. That’s why we recommend keeping humidity under 60% to prevent mold and mildew, and to help plants get the CO2 they need for efficient photosynthesis.
Vapor Pressure Deficit
For optimal indoor growth, don’t forget about VPD. It’s a measure of the difference between vapor pressure in the leaves of your plants and the air surrounding them. Humidity control in the growth environment helps ensure that plants can “breathe” by taking in moisture and letting it out.
- 70 Pints/day – Industrial-level humidity control for hobbyists and micro grow operations
- Energy Efficient – Removes up to 2.1 liters per kilowatt hour, helping keep your operation efficient
- No-Hassle Drainage – The positive pressure drain removes the need for a drain trap. Just proper drainage, with no monitoring required
- MERV 11 Filter – The self-sealing air filter traps up to 95% of pollutants from the air to protect your plants and the unit’s vital components. Plus it’s easy to replace
- Flexible Installation – Options for suspended, freestanding, or ducted installation
- Built-in Digital Control – The on-board controls include a digital display for intuitive operation and monitoring
- Optional Remote Control – Purchase the Model A77 remote control to relay diagnostics from the dehumidifier, giving you simple control of the conditions in your cultivation space (other options available)
- 1-2-3 for VPD – The unit constantly monitors humidity and temperature, making it simple to reach the optimal Vapor Pressure Deficit for maximum growth
- Built to Last – Dependability is at the heart of what we do. That’s why we offer a 5-year warranty on all parts including the refrigeration system–so you can grow with confidence
Whether you are starting seedlings, rooting cuttings or drying, humidity control is critical. Humidity rising above 60% can lead to molds, mildews, and other unwanted biological growth. High humidity can also prevent plants from properly taking in CO2, preventing efficient photosynthesis. Anden helps create an environment that drives transpiration at an optimal rate, while helping prevent disease outbreaks.
Water Removal Rates(Pints/Day)
- 70 Pints 80°F/60% RH
- Part Number: A70
- Capacity (water removal): 70 ppd
- Energy factor: 2.1 L/kWh, 4.4 pints/kWh
- Voltage, Phase, Frequency: 120 VAC, 1 Phase, 60 Hz
- Current draw (amps): 5.4
- Power (watts): 645
- Btu/h: 2,180
- Noise: 53 dBA ducted | 58 dBA unducted
- Inlet air operating conditions during:
- Dehumidification: 50°F–104°F, 40°F dew point min.
- Ventilation: 40°F–140°F, 0%–99% RH (non-condensing)
- Warranty: 5 Years
Unit Dimensions
- Width: 12 1/2"
- Height: 12 1/2"
- Depth: 25"
- Weight: 56 lbs
Included Items
- Drain fitting: 3/4" MPT x 3/4" barbed
- 10 ft. Drain tubing: 3/4" ID
- Duct collars: 8" Round
- Manual: Installation instruction
