- Overview
- Features
- Tech Spes
- PDF Downloads
- Reviews
- Model: A130
- Part Number: A130
- Water Removal: 130 Pints Per Day
- Voltage, Phase, Frequency: 120VAC, 1 Phase, 60 Hz
- Current draw: 7.7 Amps
- Weight: 113 lbs
Grow environments require high-capacity, specially designed dehumidifiers to control humidity and protect crops. The Anden A130 dehumidifier delivers performance, capacity and reliability that is not available from the portable units sold via retail. With 130 pints per day removal capacity, integration with smart controls and a 5-year warranty, you can trust Anden to protect your crop.
The Anden Model A130 Series Dehumidifier is designed to dehumidify the air coming into the unit by passing the incoming air over an evaporator coil to drop the air temperature below the dew point of the air. Moisture is removed from the air and drained out of the unit to a common floor or waste drain. The air is then reheated in the condenser coil and exits the unit.
Dehumidification occurs until the set point is reached, then shuts off until periodic sampling determines a need for operation.
The Anden Model A130 Dehumidifier is the perfect solution for the precise management of humidity required in an indoor growing environment.
Click here to view more of Anden Dehumidifiers
The Anden Impact
Anden dehumidifiers put you in control of your growth environment. You get maximum moisture removal and VPD control, with on-board and remote monitoring capabilities to make it all intuitive. Simply put, these grow-optimized products are designed with your plants in mind.
Humidity And Growth
Humidity control is critical. As a cultivator, you know that. Each stage of growth requires an optimized environment. That’s why we recommend keeping humidity under 60% to prevent mold and mildew, and to help plants get the CO2 they need for efficient photosynthesis.
Vapor Pressure Deficit
For optimal indoor growth, don’t forget about VPD. It’s a measure of the difference between vapor pressure in the leaves of your plants and the air surrounding them. Humidity control in the growth environment helps ensure that plants can “breathe" by taking in moisture and letting it out.
- 130 Pints/day – Industrial-level humidity control
- 310 CFM @ 0.0" – Powerful circulation helps remove moisture from the air efficiently
- Energy Efficient – Removes up to 2.8 liters per kilowatt hour, helping keep your operation efficient
- No-Hassle Drainage – The positive pressure drain removes the need for a drain trap. Just proper drainage, with no monitoring required
- Easy Filters – The self-sealing air filter protects the unit’s vital components, plus it’s easy to replace
- Flexible Installation – The pre-installed electrical plug is simple to remove for hard-wired applications. Plus, options for suspended, freestanding, or ducted installation
- Safety Checks – Terminals on the dehumidifier make it easy to install a float switch to protect against overflows
- 1-2-3 for VPD – The unit constantly monitors humidity and temperature, making it simple to reach the optimal Vapor Pressure Deficit for maximum growth
- Built to Last – Designed and Manufactured in U.S.A. Dependability is at the heart of what we do. That’s why we offer a 5-year warranty on this product–so you can grow with confidence
Whether you are starting seedlings, rooting cuttings or drying, humidity control is critical. Humidity rising above 60% can lead to molds, mildews, and other unwanted biological growth. High humidity can also prevent plants from properly taking in CO2, preventing efficient photosynthesis. Anden helps create an environment that drives transpiration at an optimal rate, while helping prevent disease outbreaks.
Water Removal Rates(Pints/Day)
- 130 Pints 80°F/60% RH
- Part Number: A130
- Capacity (water removal): 130 ppd
- Energy factor: 2.9 L/kWh, 6.1 pints/kWh
- Voltage, Phase, Frequency: 120 VAC, 1 Phase, 60 Hz
- Current draw (amps): 7.7
- Power (watts): 920
- Btu/h: 3,310
- Noise: 50 dBA
- Inlet air operating conditions during:
- Dehumidification: 50°F–104°F, 40°F dew point min.
- Ventilation: 40°F–140°F, 0%–99% RH (non-condensing)
- Warranty: 5 Years
Unit Dimensions
- Width: 19 1/2"
- Height: 18 3/4"
- Depth: 30 1/16"
- Weight: 113 lbs
Included Items
- Drain fitting: 3/4" MPT x 3/4" barbed
- 10 ft. Drain tubing: 3/4" ID
- Duct collars: 10" Round
- Manual: Installation instruction
