- Overview
- Features
- Tech Specs
- PDF Downloads
- Accessories
- Warranty
- Reviews
- Cooling capacity: 16,800 BTU/hr
- Heating capacity: 18,500 BTU/hr
- Condenser Airflow: 890 cfm
- Voltage: 115/1
- Refrigerant: R410A
Koldwave’s Air-Cooled Portable Air Conditioner/Heater: 6HK16. 16,800 BTU/HR of Temporary, Portable Spot Cooling, Or 18,500 BTU/HR of Temporary, Portable Spot Heating.
KOLDWAVE Portable Heat Pump feature spot cooling/heating for large areas where cooling/heating of the entire area is not practical. A dedicated spot cooling/heating thermostat controls the unit in this application.
This unit can also be used in smaller areas for room cooling/heating. A control panel provides ease of use and contains a self-diagnostic function and display, showing operating modes, room and set temperatures, and faults. If an abnormal operation occurs, a visual display of the fault is shown. Caster wheels are included for easy portability. Suitable applications include: a factory or work place, industrial kitchen, computer room, emergency cooling/heating, outdoor event, supplement cooling / heating etc.
- View more of our Koldwave Air Cooled Portable Air Conditioners
- 16,800 Btu Cooling Capacity
- 18,500 Btu Heating Capacity
- Spot-Cool / Room-Cool Thermostat Settings
- Internally Insulated with Fiberglass Insulation
- Thermostatic Control with Multi-Speed Fan
- Double Shaft Motor for Two Fans
- R410A Refrigerant
- Optional Easy Install Condensate Pump Kit
- with Overflow Protection
- 115V/1 Phase
- Directional Nozzles (2)
- Heavy Duty Twin Wheel Casters for Portability
- Auto Fan Speed Option
- Self-Diagnostic Function
- Off-Timer
- Washable Filters
- 12" Hot Air Exhaust Flange
- Cooling Capacity (BTU/hr): 16,800
- Heating Capacity (BTU/hr): 18,500
- Cooling Test Conditions: 95°F
- Voltage/Phase/Hz: 115/1/60
- Amperage: 16
- Fuse Size: 20 Amps (Time delay fuses and circuit breakers are recommended)
- LCDI Plug Configuration: NEMA 5-20P
- Power Cord Length: 6 ft.
- Refrigerant Type: R410A
- Condensate Tank Capacity: 3.17 Gal
- Ambient Temperature Range (Heating): 54 - 77°F
- Ambient Temperature Range (Cooling): 64 - 113°F
- Setting Temperature (In Temp Mode):
- Cooling: 64 - 113°F
- Heating: 64 - 113°F
- Auto: 70 - 113°F
- Setting Temperature (Out Temp Mode):
- Cooling: 32°F
- Heating: 122°F
- Auto: 70 - 113°F
- Application Area Ft² (Room Cool Mode): 355
- Refrigerant Type / Ounces: R410A / 44.8
- Design Pressure High/Low: 465 / 160 PSIG
- Indoor Air Flow: 470 CFM
- Hot Air Duct Diameter: 12 in.
- Maximum Exhaust Duct Length: 50 ft.
- Condenser Air Flow: 890 CFM
- FLA: 15.5 Amps
- Max Duct Length: Cold Air Supply: 45 ft.
- Max Duct Length: Hot Air Discharge: 50 ft.
- Duct Connection Hot Air Discharge: 12 in.
- Drain Type: Bucket (4 gal.)
Dimensional Data
- Width x Depth x Height (Inches): 24" x 30" x 49"
- Weight (Lbs.): 230
- Shipping Weight (Lbs.): 251
Safety Device Data
- Compressor Overload Protection
- Anti-freezing Thermistor
- Automatic Restart (Power Interruption)
- Compressor Time Delay Program
- High Pressure Sensor & Low Pressure Sensor
- Condensate Pump 115V (KSA057-0072)
- 16 ft. Long Temperature Sensor (KSA076-4007)
- Condenser Discharge Kit - 12" Dia. Duct Kit with Ceiling Panel (KSA076-3635)
- Condenser Return Air Kit - Return Air Plenum Kit (KSA076-4004)
- Condenser Return Air Kit - 12" Dia. Duct Kit with Ceiling Panel (KSA076-3635)
- Condenser Return Air Kit - Vinyl Chloride Filter for Evaporator (KWPCFLT-07E)
- Condenser Return Air Kit - Aluminum Filter for Condenser (KWPCFLT-08C)
- Free phone technical support
- 2-year parts-only warranty
- 3-year compressor warranty