The Ebac Neptune Professional Dehumidifier is the ideal unit for commercial and residential work. Its compact size permits one-man operation, yet it has the capacity to handle several room-size areas at a time. Best of all, it's affordably priced within the budget of most restoration specialists or homeowners.

Designed for a wide range of applications, the Neptune dehumidifier is a super high capacity industrial unit which provides fast and efficient drying.

• Super high efficiency rotary compressor
• Temperature-sensitive microprocessor controlled defrost system
• Exterior epoxy powder-coated finish
• Internal condensate pump (optional)
• Rugged portable design
• Heavy duty carrying handle
• Extra long power cord

The fan draws the moist air through the inlet grille on the back of the unit, then through the cold evaporator coil, which cools the air below its dew point. Moisture forms on the evaporator coil and is collected in the condensate tray, which is equipped with a permanent drain. The cooled air then passes through the hot condenser coil where it is reheated using the same energy removed during the cooling phase, plus the additional heat generated by the compressor. The air is, therefore, discharged from the dehumidifier at a slightly higher temperature with a lower absolute humidity than that which entered. Continuous circulation of air through the dehumidifier gradually reduces the relative humidity within the area.

The dehumidifier is a rugged, reliable drying unit designed to operate effectively over a broad range of temperature and humidity conditions.

The unit incorporates a welded and galvanized steel chassis and is finished in an epoxy coating for resilience to damage caused by rough handling.

Performance

The Ebac Neptune dehumidifier is a rugged, yet mobile piece of equipment that will operate under extreme conditions and pull large amounts of moisture from the air.

• Anti-Vibration Rubber feet
• Collapsible Handle for easy transport
• Super high efficiency rotary compressor.
• Extra long power cord.
• Temperature sensitive defrost control for optimum performance.
• EIPL's unique "Hot Gas" defrosting feature which automatically melts away frost buildup providing effective operation at low ambient temperatures.
• Rugged, epoxy powder-coated steel chassis and housing
• Simplicity of installation and operation with a standard 115V plugs.
• Low amp draw.
• Up to 12 gallons per day water removal.
• 1 year factory warranty.

• On/Off Control: Yes
• Temprature Sensitive Defrost Control: Yes
• Compressor Type: Rotary
• Fitted Mains Plug: Yes
• Rubber Anti-Vibration Feet: Yes
• Hot Gas Defrost System: Yes
• Gravity Drain: Yes
• 25' Length Power Cord: Yes
• Epoxy Powder Coating: Yes
• Quite Operation: Yes
• Lightweight Compact Portable: Yes
• Low Amp Draw: Yes

• Compressor: High Efficiency Rotary
• Height: 15"
• Width: 14"
• Depth: 24"
• Weight: 60lbs.
• Voltage: 115V
• Phase: 1
• Frequency: 60 Hz
• Current: 5A
• Power: 470kW
• Airflow: 282 cfm
• Noise Level: 57 dba
• Refrigerant: R22
• Effective Volume: 8,369 cu.ft.
• Typical Extraction: 52 ppd
• Min Operating Temp: 33 degrees Fahrenheit
• Max Operating Temp: 95 degrees Fahrenheit

• Water Damage Restoration
• Permanent Commercial Spaces
• Residential Spaces
• Industrial Spaces