Quest Dry 115 Desiccant Dehumidifier

• Model: Quest Dry 115
• Water Removal: 115 Pints Per Day
• Airflow: 385 CFM Process Ariflow @ 0" ESP 75 CFM Reactivation Airflow @ 0"ESP
• Power: 2 Circuits; 11Amps, 115VAC each 22 Amps total power consumption
• Temperature Range: 10°F - 140°F
• Weight: 105 lbs

The Quest Dry 115 Desiccant Dehumidifier provides more water removal (in certain conditions) and a wider operating range than refrigerant based dehumidifiers.

This Quest dehumidifier provides more water removal (in certain conditions) and a wider operating range than refrigerant based dehumidifiers. The Quest Dry 115 is designed to operate vertically or horizontally, and accommodates multiple ducting scenarios. Two standard 115VAC power cords are included and, after correctly directing the wet reactivation air, the Quest Dry 115 can simply be plugged in and turned on. An available low voltage control kit allows the Quest dehumidifier to be controlled by a remote dehumidistat, timer, or switch. This industrial dehumidifier can be combined with other high efficiency dehumidifiers to provide extra capacity and better control in situations with high peak moisture loads, or where external ducting is impractical.

This industrial dehumidifier is built on proven desiccant wheel technology which brings in air from the room and passes it through a wheel containing desiccant material. The moisture from the air is adsorbed into the wheel and the dried air exits the Quest dehumidifier. The moist wheel then passes into a Drying chamber inside the Quest Dry 115 where hot air removes the moisture and "reactivates" the wheel. The moisture laden waste air exits the Quest Dry 115 and is directed either outside of the space if practical, or into a high efficiency dehumidifier where the liquid water can be removed.

♦ View more of our Desiccant Dehumidifiers
♦ Click here to view more of Quest Dehumidifiers

 

Features

• Wide operating range for dehumidification
• Superior low dew point operation
• 115 Pints/Day @ AHAM
• 22 Amps total power consumption
• Factory installed 115VAC power cords (2 required @ 15 Amps each)
• Simple ON/OFF operation with available low voltage control kit accessory for remote dehumidification operation
• Vertical or horizontal operation
• Multiple ducting options

Water Removal Rates(Pints/Day)

• 56 Pints 100°F, 20%
• 160 Pints 90° F, 90%
• 135 Pints 80° F, 80%
• 115 Pints 80° F, 60% (AHAM)
• 115 Pints 70° F, 80%
• 105 Pints 70° F, 60%
• 105 Pints 60° F, 80%
• 99 Pints 60° F, 60%
• 110 Pints 50° F, 80%
• 93 Pints 50° F, 60%
• 25 Pints 10° F, 80%

 

• Part Number: 4027110
• Power: 2 Circuits; 11Amps, 115VAC each 22 Amps total power consumption
• Kilowatts: 2.5 (63 KWh/Day)
• Capacity (24hr) 115 Pints (80°F 60%RH)
• Blower: 385 CFM Process Ariflow @ 0" ESP 75 CFM Reactivation Airflow @ 0"ESP
• Temperature Range 10°F to 140°F*
• Process Filter Size: 16" X 20" X 2"
• Reactivation Filter Size: 12" X 12" X 1"
• Duct Process Inlet: 12" Flex-Duct (optional)
• Connections Process Outlet: 10" Lay Flat collar(optional)
• Reactivation Inlet: 6" Flex-Duct (optional)
• Reactivation Outlet: 6" Flex-Duct(required)
• Warranty 1 Year Parts and Labor

*Low temperature performance is dependent on reactivation air source. Supplying warmer reactivation air will significantly increase water removal.

Unit Dimensions

• Width: 20"
• Height: 36"
• Depth: 20"
• Weight: 105 lbs

Shipping Dimensions

• Width: 25"
• Height: 47"
• Depth: 24"
• Weight: 125 lbs

 

• Quest Dry 115 Desiccant Spec
• Quest Dry 115 Desiccant manual