Ebac BD150 Dehumidifier

• Water Removal: 97 pints per day
• Airflow: 650 cfm (cubic feet per minute)
• Noise Level: 72 dba (compare to freight train at 100 ft at 70 dba)
• Weight: 146 lbs
• Minimum Operation Temperature: 33°F

The EBAC BD150 DEHUMIDIFIER is the ideal dehumidifier for commercial and residential work.

Its compact size permits one man operation, yet has the capacity to handle multiple room size areas at a time. It can reduce drying times by as much as two thirds depending on conditions, and reduce the costs of drying by conventional heating by as much as 70%!

Best of all, it's affordably priced within the budget of most restoration specialists.

How Ebac BD150 Dehumidifier Works

Designed for a wide range of applications, the Ebac BD150 dehumidifier is a super high capacity industrial dehumidifier which provides fast and efficient drying.

The fan draws the moist air through the inlet grille on the back of the unit, then through the cold evaporator coil, which cools the air below its dew point. Moisture forms on the evaporator coil and is collected in the condensate tray, which is equipped with a permanent drain. The cooled air then passes through the hot condenser coil where it is reheated using the same energy removed during the cooling phase, plus the additional heat generated by the compressor. The air is, therefore, discharged from the dehumidifier at a slightly higher temperature with a lower absolute humidity than that which entered. Continuous circulation of air through the dehumidifier gradually reduces the relative humidity within the area.

The Ebac BD150 dehumidifier is a rugged, reliable drying unit designed to operate effectively over a broad range of temperature and humidity conditions.

The unit incorporates a welded and galvanized steel chassis and is finished in an epoxy coating for resilience to damage caused by rough handling.

Ebac BD150 Dehumidifier Proven Performance

The Ebac BD150 Building Dryer and Dehumidifier is a rugged, yet mobile piece of equipment that will operate under extreme conditions and pull large amounts of moisture from the air. In high humidity cases, the Ebac BD 150 dehumidifier has removed almost 27 gallons of water in a 24-hour period!

• To accelerate the drying of new and renovated construction interiors, (once weathertight), to enable plaster, drywall, masonry, paint and carpet to be quickly completed.
• To restore rather than replace carpets in flood-damaged areas.
• To dry out basements.
• To maintain a comfortable locker room environment.
• To safeguard stored goods from mildew, deterioration, and rot.
• To control the sensitive environment of computer rooms, laboratories, and vaults.

Mechanical Dehumidification Process Open flash in new window

Key Design Features

• Rugged Wheels
• Collapsible handle for easy transport
• Extra long power cord(25')
• Effective, reverse cycle defrosting feature which automatically melts away frost buildup providing effective operation at low ambient temperatures
• RUgged, epoxy powder-coated steel chassis and housing
• Simplicity of installation and operation with a standard 115V plug

Features

• On/Off Control Rotary Switch: Yes
• Integral Handle for easy mobility: Yes
• Fitted Mains Plug: Yes
• Large Diameter Rugged Wheels: Yes
• Elecronic Cycle Timer: Yes
• Effective Reverse Cycle Defrost System: Yes
• 25' Length Power Cord: Yes
• Epoxy Powder Coating: Yes
• Integral Condensate Pump: No

• Model No.: 10245RW-US
• Height: 36"(914mm)
• Width: 24"(610mm)
• Depth: 24"(610mm)
• Weight: 146lbs.(66kg)
• Voltage: 110V
• Phase: 1
• Frequency: 60 Hz
• Current: 13A
• Power: 2kW
• Airflow: 650cfm(1098m3/hr)
• Noise Level: 72 dba
• Refrigerant: R407C
• Effective Volume: 10,594 cu.ft(300m3)
• Typical Extraction: 97 ppd
• Min Operating Temp: 33°F (1°C)
• Max Operating Temp: 95°F (35°C)

• Flood & Restoration
• Roof Leaks
• Basements / Cellars
• Laundries
• Vehicle Storage
• Hotels / Guest Houses
• Second Homes
• Laboratories
• Offices