IQAir VM FlexVac

The IQAir VM FlexVac converts any IQAir filtration device into a wall-mounted, self-contained extraction system that captures fumes, dust and vapors at the source.

The IQAir VM FlexVac consists of a vertical mount fixture combined with a flexible extraction duct system. The suction duct of the IQAir VM FlexVac may be bent, twisted and turned into virtually any position and will remain in place until repositioned. It is made from shatterproof, chemically resistant poly-propylene. Its large 5" diameter ensures low pressure drop and exceptionally high suction volume. At a typical air flow rate of 150 cfm the air velocity with the duct is approx. 12 mph. or 17 ft/s. The remote control, which is supplied with each IQAir filtration device, ensures convenient operability even when the control panel is out of reach.

The IQAir VM FlexVac is designed so that all filters remain fully servicable while the IQAir filtration device remains wall mounted. A locking mechanism ensures that the air cleaner is safely secured within the wall mount.

Vertical Mount -

Material: 1/16" (1.5 mm) steel, white powder coated
Height: 23.6"
Width: 16.1"
Depth: 15.2"
Weight: 14.7 lbs.

Suction Duct -

Material: Interlocked poly-propylene (PP), mint white
Diameter: 5" (125 mm)
Length: 5' (1500 mm)
Maximum Horizontal Reach: 4' (1200 mm)
Minimum bending radius at 72 degrees Fahrenheit (25 degrees Celsius), 14" (360 mm)
Service temperature range: -13 to 180 degrees Fahrenheit (-28 to 93 degrees Celsius)

The IQAir VM FlexVac is designed so that all filters remain fully servicable while the IQAir filtration device remains wall mounted. A locking mechanism ensures that the air cleaner is safely secured within the wall mount.

The IQAir VM FlexVac kit is supplied with six universal wall plugs and screws suitable for concrete, brick and dry wall. Please ensure that your wall is structurally sound enough to support the weight if your IQAir system.

IQAir Compatibility: