IQAir InFlow W125

The IQAir InFlow W125 ducting kit enables any IQAir filtratio system to draw air through a wall or window vent into an indoor environment. Use of the IQAir InFlow W125 is advisable when the main pollution source is located in adjacent indoor environments or outdoors.

Enjoy Controlled Clean Air Ventilation:

An IQAir filter system combined with an IQAir InFlow W125 can be installed to draw outdoor air into an indoor environment. In this setup, an IQAir unit serves as a ventilation system, bringing in oxygen-rich outdoor air and a filtration system, which removes undesirable outdoor pollutants such as pollen, mold spores, dust and exhaust soot. As a result, fresh and filtered outside air comes into the room.

Creation of Pressure Differentials:

The IQAir InFlow W125 lets you create pressure differentials between different indoor environments. Under-pressure environments serve to contain pollutants in isolation areas. Over-pressure protects clean environments from uncontrolled infiltration of airborne contaminants from more polluted surrounding areas.

• Hole Diameter Required: 5.2" (132 mm)
• Wall Tube Length: 4" (100 mm) & 6" (150 mm)

• 5" (125 mm) internal diameter
• Minimum Bend Radius: 10" (250 mm)
• Adjustable Length from 10" (250 mm) to 39" (1000 mm)

Clean Area & Cleanroom Use:

The supply of filtered air into an environment helps reduce air pollution in that environment by dilution and the creation of over-pressure, which reduces the influx of polluted outside air into the clean area. With the IQAir InFlow W125 kit, the filtration unit is positioned inside the clean area or cleanroom, allowing for convenient control of the unit.

IQAir Compatibility:

• Compatible with all IQAir filtration devices.

Not compatible with the following accessories:

• PF40
• VMF
• VM FlexVac
• VM InFlow
• InFlow W125
• Mobility 56
• OutFlow W125

• Protection of allergy sufferers from pollen exposure in their home.
• Protection of patients from microbiological exposure (e.g. aspergillus) in a hospital.
• Creation of clean research or manufacturing areas (controlled environments).
• Protection of plant control rooms from corrosive contaminants.
• Creation of a clean zone within a home or office which helps to prevent outdoor pollution from nature, factories, traffic, agriculture to enter.

• Diluting polluted air with clean air.
• Flushing out air pollutants.
• Reducing influx of new pollutants due to a build-up of positive pressure.
• By increasing oxygen content in indoor air (when outdoor aor is being drawn in).