|
|
Ebac CD425 Dehumidifier
:

The Ebac 425 was developed to serve the demands of industry for environmental control of very large areas as well as areas with severe conditions. Warehouses, factories, offices and other large-scale facilities with ambient temperatures ranging from 33 F to over 100 F can be cured of humidity and condensation problems efficiently and automatically without over burdening costly HVAC systems. The CD425 can be utilized singly or in multiple units to provide protection on any scale. Ducted applications are possible where design requirements specify.


FREE SHIPPING!
|
|
|
|
- Welded steel chassis with baked epoxy and vinyl coating for abrasion and corrosion resistance.
- An adjustable humidistat, to control the level of dryness desired.
- System lamps to tell the operating status of the unit at a glance.
- Ebac's unique "Hot Gas" defrosting feature to allow continuous operation at low ambient temperatures, down to 33 degrees Fahrenheit.
- Rugged design for harsh industrial environment.
Optional Features:
- 460V power supply (8 Amp.)
- Internal condensate pump (both 220v and 440v)
- Low temperature operation, down to 0 degrees Fahrenheit
- Compressor: Reciprocating
- Height: 47"
- Width: 43"
- Depth: 19"
- Weight: 353lbs.
- Voltage: 220/440
- Phase: 3
- Frequency: 60 Hz
- Current: 16A
- Airflow: 1750 cfm
- Refrigerant: R22
- Typical Extraction: 285 ppd
- Min Operating Temp: 33 degrees Fahrenheit
- Max Operating Temp: 105 degrees Fahrenheit
The Ebac CD425 dehumidifier is a "stand-alone" unit that can handle the extra load encountered in the typically humid industrial setting. Under maximum conditions, the CD425 will condense and remove over 50 gallons of water vapor per day - day after day. With "Hot Gas" defrosting, this workhorse can function smoothly in a cold, wet location without the limitations of frost build-up.
Whenever there is a need for fast, dependable, energy-efficient drying, Ebac can provide the answer.
- Warehouses
- Factories
- Offices
- Large scale facilities
|
|
|